Tilbake til søkeresultatene

CLIMIT-Forskning, utvikling og demo av CO2-håndtering

Distributed seismic monitoring for geological carbon sequestration

Alternativ tittel: Distribuert seismisk monitorering for geologisk CO2 lagring

Tildelt: kr 10,0 mill.

Målet med DEMODAS, er å utvikle kosteffektive overvåkningssystem for geologisk CO2 lagring ved bruk av fiberoptisk distribuert akustisk sensing (DAS) teknologi. Med DAS kan man måle rystelser i grunnen. Optiske fiberkabler kan også benyttes som seismiske sensorer for aktiv og passiv seismikk. for overvåkning av CO2 lekkasje rundt CO2 reservoaret. DAS har derfor potensialet til å bli en billig og effektiv teknologi for overvåkning av CO2 lagring I løpet av DEMODAS prosjektet ble det bygget tre prototyper av feltbasert DAS-instrument. For alle metodene ble det utviklet metoder for prosessering av rådataene. Det ble utført laboratorie- og felttester både i Norge og i Canada. Menneskeskapte rystelser (ved slag og luftgevær) ble detektert med fiber montert på bakken og i brønner. Målingene ble sammenlignet med målinger med geofoner og hydrofoner. For det fase sensitive DAS utstyret var det god samsvar mellom DAS målingene og målingene registrert med geofoner. Den siste felttesten ble gjennomført ved NTNU feltlab i november 2018. Målingene ble utført over en 50 km lang fiberkabel. Man greide å detekter signaler over 50 km, men med det oppsette på DAS instrumentet som ble brukt, var det vanskelig å tolke signalene. I og med at man ikke lyktes med å utføre egne DAS målinger ved full skala injeksjonstester i løpet av prosjektperioden, ble det benyttet tilgjengelige seismiske data, både passive og aktive, blant annet fra blow outen i brønn 2/4-14 i Nordsjøen i 1989 for å overvåke migrasjon av gass i sedimentene over reservoaret. Det er også gjort et studie på korrelasjonen mellom sprekker/ forkastninger og CO2 lekkasje. Feltstudier fra Mexico og Utah, USA viser klar korrelasjon mellom sprekkesoner og CO2 lekkasje

The three research partners (NORCE, NTNU and NORSAR) are continuing the research activities on DAS applied for CCS in new projects. The knowledge gained in DEMODAS is shared with the ECCSEL Svelvik CO2 Field Lab project team in the design phase of the Svelvik site. Though the Gundih field test, Indonesia was cancelled, Institute Technology of Bandung (ITB), Indonesia has been an active partner participating in three of the project workshops. ITB is involved in establish the first CCS site in Gundih, Indonesia, DAS is still a promising technology with huge potential, in particular as low-cost, permanent monitoring system. Key challenges remain, particular in data analysis before DAS will be routinely deployed in monitoring of CO2 storage sites. DEMODAS contributed in the understanding of the technology and the potential applications of DAS. The two industry partners will continue the DEMODAS activities by participation in an international project on applying DAS for CO2 storage

This collaborative project seeks to develop and demonstrate distributed acoustic sensing (DAS) technology applied to geological carbon sequestration. Field tests will be performed at NTNU's field lab in Trondheim and the CaMi Field Research Station (FRS), Canada. By combining DAS data acquired from buried fibre cables and borehole fibre cables during multi-source seismic excitation experiments, and passive long term monitoring of the injection process, DAS has the potential to reveal information that could be used for optimising the injection process and validating well and geological formation integrity. The combination of DAS data with complementary data from EM -wave, conventional seismic, and gravimetric methods may provide further enhanced capability. DAS is a low-cost technique that fits well into the portfolio of monitoring techniques needed to secure safe injection and containment of CO2. A cOTDR interrogation unit with software for controlling the unit and recording data will be designed and made. The unit will be verified by comparison tests with conventional geophone technology(WP1). WP2 will focus on the design of the microseismic and 3D VSP field experiments. The design work will take into account geological data and geophysical models. This ensures best experiment geometry at surface and depth for the buried fibre, as well as best configuration for the combination of acoustic source and the fibre cable. Full stack seismic data from base and monitor surveys will be analysed. Difference techniques will be used to identify anomalies. VSP data from DAS systems will be used to calibrate seismic data and rock physics models for supercritical CO2 will be used to model and help the interpretation. Further will time-lapse AVO methods be tested. Visualization techniques to enhanced seismic volumetric imaging will be provided and geo-modelling and flow simulations of the interpreted seismic data will be performed (WP3)

Publikasjoner hentet fra Cristin

Ingen publikasjoner funnet

Ingen publikasjoner funnet

Ingen publikasjoner funnet

Budsjettformål:

CLIMIT-Forskning, utvikling og demo av CO2-håndtering