Tilbake til søkeresultatene

ENERGIX-Stort program energi

WindBarge- Low cost floating wind energy production

Alternativ tittel: WindBarge - Lavkost flytende vindenergiproduksjon

Tildelt: kr 7,0 mill.

Prosjektnummer:

336968

Prosjektperiode:

2023 - 2025

Midlene er mottatt fra:

Organisasjon:

Samarbeidsland:

Målet med prosjektet er å utvikle en ny kostnadseffektiv flytende havvindturbin som skal redusere bunnforstyrrelser på vanndyp i størrelsen 30-100 meter. Flyteren kan benytte en kommersiell men gigantisk vindturbin opp til 20 MW. Den forankres mot bunnen med et enkelt anker og forankringsline med integrert elektrisk kabel og ligger derfor på svai. Dvs den rotere med vinden rundt ankerpunktet. Flyteren ligger med liten dypgang og vil være svært enkel å installere vha en slepebåt. I tillegg kan den lett slepes til land hvis behov for omfattende vedlikehold. Ikke minst vil den være enkel å fjerne. Flyteren har fått en litt spesiell form som gjør at den ligger både retningstabilt og tverrstabilt, selv med en svært stor turbin med generatorhøyde 137 meter over vannspeilet. Flyteren vil stå mest mulig mot været i tett samvirke med forankringssystemet. Flyteren kan sammenstilles ved verft med små vanndybder som gir muligheter for serieproduksjon i mange land. Et viktig prinsipp er å utnytte eksisterende skipsverft. I prosjektet vil utviklingsfirmaet GFMS AS få god hjelp av viktige havvindoperatør som Vattenfall, Fosen Yard (produksjon) og APL (forankringsystem). I tillegg viktige kompetansebedrifter på enginering og analyser som Norconsult, EDR&Medeso og CFDMarine. Ikke minst fra NTNU med både modellforsøk og studier. Ved kvalifisering av de viktigste elementene i konseptet vil veien videre rettes inn mot detaljert design og prototype. Dette planlegges over en femårsperiode. Da åpner et marked seg som er svært stort både i Østersjøen og Nordsjøen. Pga fleksibel produksjon kan WindBarge produseres for et stort verdensmarked.

WindBarge is at present a floater design with single line mooring developed for large offshore wind turbines from at least 15 MW. The design enables floating wind turbines in water depths from 30 to 100 meters. These are depths with a large energy potential in the shores surrounding Europe, USA and other areas like the Taiwan Strait. It is especially suited for the Northern Sea and Baltic Sea supporting the ambitious plans for 120 TWh annual offshore wind production in Sweden and thus compete with bottom fixed technology. Due to its simplicity, the WindBarge will significantly reduce the costs for production, installation, maintenance and removal of offshore wind turbines. The cost of energy is targeted to reach the same level as the established bottom fixed offshore wind technology. The combination of the single line mooring system, the triangular shape and the barge simplicity will reduce the cost of the floater by utilizing shipyard types of production facilities and cost-efficient integrated installation bayside on the yard. The shape has a stabilizing effect on the weather vanning capabilities of the mooring system, and it increases the ability to protect access vessels and thereby increase the weather window for access vessels. There are several research challenges related to the novel approach of the design since some risks must be addressed to obtain radical cost savings and yield improvements. The project will develop a method for an optimal design of the triangular shaped floater and single line mooring with the integrated electrical cable using advanced numerical modelling tools. Experimental verification will be performed by NTNU and supported by comprehensive numerical CFD simulations. Vattenfall, with an interest in pursuing the barge based conceptual design for shallow water depths with a potential available demonstration site ready for deployment, will ensure relevance and competitiveness in all planned activities.

Budsjettformål:

ENERGIX-Stort program energi